NEW Spray Powder S5/16 – 22 |
 |
Clean, Safe and Environmentally Friendly
Do you want to cut back on cleaning downtime while also giving your employees a safer and cleaner environment in which to work? Why not consider changing the spray powder you use?
A common problem faced by most printers is that of spray powder residue. Residue floats in the air breathed by factory workers, it mixes with oils, grease and fluids to clog gripper bars and other moving parts, and it creates unnecessary wear and tear on machinery adding to maintenance costs.
Heidelberg cannot eliminate spray powder residue completely but it offers a quality product that will reduce powder residue - KSL S5/16 or 22 micron powders.
S5/16 and 22 micron powders produce less dust than conventional powders. Almost all grain particles smaller than 10 microns have been extracted from the product. With this optimized grain assortment the powder has excellent fluidity and gliding characteristics, giving you more even paper stacks (especially important when the stock has to pass a second time through the press) without fine residue.
Heidelberg’s S5/16 and 22 powders meet the German Institution for Statutory Accident Insurance and Prevention standards and are on the body’s recommendation list of safe products for the Printing and Paper Processing Industry.
S5/16 and 22 are manufactured from Natural Organic Starches with soft grains and are insoluble in water and are gentle to printing plates and paper matter.
S5/16 and 22 Spray Powders are suitable for all spraying devices.
Further Information:
Kevin Lampard
Account Manager - Consumables
Tel: +61 3 9205 4117
Email: Kevin.Lampard@heidelberg.com
|
|
|
|
|
|
|
|
|
 |
|
Consumables
Welcome to Heidelberg Consumables, where you will find a wide range of high quality, value-added Heidelberg consumable products.
 more
|
|
|